Spaceball 3003 Flx Drivers For Mac

Disclaimer This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. Zen micro baixar de software for mac. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA USA Should you need to contact me, the author, you can do so either by e-mail - mail your message to, or by paper mail: Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic For your convenience, the GNU General Public License version 2 is included in the package: See the file COPYING. Jstest /dev/input/js0 And it should show a line with the joystick values, which update as you move the stick, and press its buttons. The axes should all be zero when the joystick is in the center position.

They should not jitter by themselves to other close values, and they also should be steady in any other position of the stick. They should have the full range from -32767 to 32767. If all this is met, then it’s all fine, and you can play the games.:) If it’s not, then there might be a problem.

Try to calibrate the joystick, and if it still doesn’t work, read the drivers section of this file, the troubleshooting section, and the FAQ. Analog joysticks The analog.c uses the standard analog inputs of the gameport, and thus supports all standard joysticks and gamepads. It uses a very advanced routine for this, allowing for data precision that can’t be found on any other system. It also supports extensions like additional hats and buttons compatible with CH Flightstick Pro, ThrustMaster FCS or 6 and 8 button gamepads. Saitek Cyborg ‘digital’ joysticks are also supported by this driver, because they’re basically souped up CHF sticks.

However the only types that can be autodetected are:. 2-axis, 4-button joystick. 3-axis, 4-button joystick. 4-axis, 4-button joystick.

Saitek Cyborg ‘digital’ joysticks For other joystick types (more/less axes, hats, and buttons) support you’ll need to specify the types either on the kernel command line or on the module command line, when inserting analog into the kernel. The parameters are. Type Meaning none No analog joystick on that port auto Autodetect joystick 2btn 2-button n-axis joystick y-joy Two 2-button 2-axis joysticks on an Y-cable y-pad Two 2-button 2-axis gamepads on an Y-cable fcs Thrustmaster FCS compatible joystick chf Joystick with a CH Flightstick compatible hat fullchf CH Flightstick compatible with two hats and 6 buttons gamepad 4/6-button n-axis gamepad gamepad8 8-button 2-axis gamepad In case your joystick doesn’t fit in any of the above categories, you can specify the type as a number by combining the bits in the table below.

This is not recommended unless you really know what are you doing. It’s not dangerous, but not simple either. Microsoft SideWinder joysticks Microsoft ‘Digital Overdrive’ protocol is supported by the sidewinder.c module. All currently supported joysticks:. Microsoft SideWinder 3D Pro. Microsoft SideWinder Force Feedback Pro. Microsoft SideWinder Force Feedback Wheel.

Microsoft SideWinder FreeStyle Pro. Microsoft SideWinder GamePad (up to four, chained). Microsoft SideWinder Precision Pro. Microsoft SideWinder Precision Pro USB are autodetected, and thus no module parameters are needed. There is one caveat with the 3D Pro. There are 9 buttons reported, although the joystick has only 8. The 9th button is the mode switch on the rear side of the joystick.

However, moving it, you’ll reset the joystick, and make it unresponsive for about a one third of a second. Furthermore, the joystick will also re-center itself, taking the position it was in during this time as a new center position. Use it if you want, but think first. The SideWinder Standard is not a digital joystick, and thus is supported by the analog driver described above. Logitech ADI devices Logitech ADI protocol is supported by the adi.c module.

It should support any Logitech device using this protocol. This includes, but is not limited to:. Logitech CyberMan 2. Logitech ThunderPad Digital. Logitech WingMan Extreme Digital. Logitech WingMan Formula.

Logitech WingMan Interceptor. Logitech WingMan GamePad. Logitech WingMan GamePad USB. Logitech WingMan GamePad Extreme. Logitech WingMan Extreme Digital 3D ADI devices are autodetected, and the driver supports up to two (any combination of) devices on a single gameport, using an Y-cable or chained together. Logitech WingMan Joystick, Logitech WingMan Attack, Logitech WingMan Extreme and Logitech WingMan ThunderPad are not digital joysticks and are handled by the analog driver described above. Logitech WingMan Warrior and Logitech Magellan are supported by serial drivers described below.

Logitech WingMan Force and Logitech WingMan Formula Force are supported by the I-Force driver described below. Logitech CyberMan is not supported yet. Gravis GrIP Gravis GrIP protocol is supported by the grip.c module. It currently supports:. Gravis GamePad Pro. Gravis BlackHawk Digital. Gravis Xterminator.

Gravis Xterminator DualControl All these devices are autodetected, and you can even use any combination of up to two of these pads either chained together or using an Y-cable on a single gameport. GrIP MultiPort isn’t supported yet. Gravis Stinger is a serial device and is supported by the stinger driver. Other Gravis joysticks are supported by the analog driver. FPGaming A3D and MadCatz A3D The Assassin 3D protocol created by FPGaming, is used both by FPGaming themselves and is licensed to MadCatz.

A3D devices are supported by the a3d.c module. It currently supports:. FPGaming Assassin 3D. MadCatz Panther. MadCatz Panther XL All these devices are autodetected. Because the Assassin 3D and the Panther allow connecting analog joysticks to them, you’ll need to load the analog driver as well to handle the attached joysticks. The trackball should work with USB mousedev module as a normal mouse.

See the USB documentation for how to setup an USB mouse. ThrustMaster DirectConnect (BSP) The TM DirectConnect (BSP) protocol is supported by the tmdc.c module. This includes, but is not limited to:. ThrustMaster Millennium 3D Interceptor. ThrustMaster 3D Rage Pad.

ThrustMaster Fusion Digital Game Pad Devices not directly supported, but hopefully working are:. ThrustMaster FragMaster. ThrustMaster Attack Throttle If you have one of these, contact me. TMDC devices are autodetected, and thus no parameters to the module are needed. Up to two TMDC devices can be connected to one gameport, using an Y-cable. SpaceTec/LabTec devices SpaceTec serial devices communicate using the SpaceWare protocol. It is supported by the spaceorb.c and spaceball.c drivers.

Spaceball 5000 Usb Driver

The devices currently supported by spaceorb.c are:. SpaceTec SpaceBall Avenger. SpaceTec SpaceOrb 360 Devices currently supported by spaceball.c are:. SpaceTec SpaceBall 4000 FLX In addition to having the spaceorb/spaceball and serport modules in the kernel, you also need to attach a serial port to it. To do that, run the inputattach program. Inputattach -spaceball /dev/tts/x & where /dev/tts/x is the serial port which the device is connected to.

After doing this, the device will be reported and will start working. There is one caveat with the SpaceOrb. The button #6, the on the bottom side of the orb, although reported as an ordinary button, causes internal recentering of the spaceorb, moving the zero point to the position in which the ball is at the moment of pressing the button. So, think first before you bind it to some other function. SpaceTec SpaceBall 2003 FLX and 3003 FLX are not supported yet. FAQ Q: Running ‘jstest /dev/input/js0’ results in “File not found” error. What’s the cause?

A: The device files don’t exist. Create them (see section 2.2).

Q: Is it possible to connect my old Atari/Commodore/Amiga/console joystick or pad that uses a 9-pin D-type cannon connector to the serial port of my PC? A: Yes, it is possible, but it’ll burn your serial port or the pad.

Spaceball 5000 Windows 10 Driver

It won’t work, of course. Q: My joystick doesn’t work with Quake / Quake 2. What’s the cause? A: Quake / Quake 2 don’t support joystick.

Use joy2key to simulate keypresses for them. Programming Interface The 1.0 driver uses a new, event based approach to the joystick driver. Instead of the user program polling for the joystick values, the joystick driver now reports only any changes of its state.

See joystick-api.txt, joystick.h and jstest.c included in the joystick package for more information. The joystick device can be used in either blocking or nonblocking mode and supports select calls.

For backward compatibility the old (v0.x) interface is still included. Any call to the joystick driver using the old interface will return values that are compatible to the old interface. This interface is still limited to 2 axes, and applications using it usually decode only 2 buttons, although the driver provides up to 32.

20, 2012, 9:50 p.m. UTC The option allows you to remove TTY and compile without errors.

This saves space on systems that won't support TTY interfaces anyway. Bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding 'depends on TTY' to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers 'select SERIO' rather than 'depends on SERIO', and 'select' does not respect dependencies.

Bloat-o-meter output filtered to not show removed entries with awk '$3!= '-' as the list was very long. 24, 2012, 1:14 a.m. UTC - Forwarded message - From: Joe Millenbach Date: Thu, Aug 23, 2012 at 5:56 PM Subject: Re: PATCH tty: Added a CONFIGTTY option to allow removal of TTY To: Alan Cox Cc: Greg Kroah-Hartman, Alan Cox, linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org, Josh Triplett, team-fjord@googlegroups.com On Tue, Aug 21, 2012 at 6:20 AM, Alan Cox wrote:. config MOUSEPS2 tristate 'PS/2 mouse' + depends on TTY It shouldn't. It would be good to understand why this occurs. If I enable this config option, and turn off TTY I get the below errors.

Drivers/built-in.o: In function `serportldiscread': serport.c:(.text+0x1aace6): undefined reference to `ttyname' serport.c:(.text+0x1aad57): undefined reference to `ttyname' drivers/built-in.o: In function `serportinit': serport.c:(.init.text+0x8478): undefined reference to `ttyregisterldisc' drivers/built-in.o: In function `serportexit': serport.c:(.exit.text+0xb29): undefined reference to `ttyunregisterldisc' All because MOUSEPS2 depends on SERIO, just like a lot of entries I blocked. I assume this means I should keep the dependency on TTY.

Unfortunately, I don't have time to dig deeper for the true cause of the dependency right now. Joe. Resending message as I forgot to turn off HTML messaging in Gmail (sorry), and I've heard SPAM blockers might eat HTML messages sent to LKML people. Joe - To unsubscribe from this list: send the line 'unsubscribe linux-kernel' in the body of a message to majordomo@vger.kernel.org More majordomo info at Please read the FAQ at http://www.tux.org/lkml/. 24, 2012, 1:15 p.m. UTC On Thu, 23 Aug 2012 18:14:48 -0700 Joe Millenbach wrote: - Forwarded message - From: Joe Millenbach Date: Thu, Aug 23, 2012 at 5:56 PM Subject: Re: PATCH tty: Added a CONFIGTTY option to allow removal of TTY To: Alan Cox Cc: Greg Kroah-Hartman, Alan Cox , linux-serial@vger.kernel.orglinux-kernel@vger.kernel.org, Josh Triplettteam-fjord@googlegroups.com On Tue, Aug 21, 2012 at 6:20 AM, Alan Cox wrote:. config MOUSEPS2 tristate 'PS/2 mouse' + depends on TTY It shouldn't.

It would be good to understand why this occurs. If I enable this config option, and turn off TTY I get the below errors. drivers/built-in.o: In function `serportldiscread': serport.c:(.text+0x1aace6): undefined reference to `ttyname' serport.c:(.text+0x1aad57): undefined reference to `ttyname' drivers/built-in.o: In function `serportinit': serport.c:(.init.text+0x8478): undefined reference to `ttyregisterldisc' drivers/built-in.o: In function `serportexit': serport.c:(.exit.text+0xb29): undefined reference to `ttyunregisterldisc' All because MOUSEPS2 depends on SERIO, just like a lot of entries I blocked.

I assume this means I should keep the dependency on TTY. Unfortunately, I don't have time to dig deeper for the true cause of the dependency right now.

The true cause I think is that serio/serport.c should depend on tty to be built but the ps/2 mouse bits shouldn't. Alan - To unsubscribe from this list: send the line 'unsubscribe linux-kernel' in the body of a message to majordomo@vger.kernel.org More majordomo info at Please read the FAQ at http://www.tux.org/lkml/. 24, 2012, 5:03 p.m.

UTC On Fri, Aug 24, 2012 at 02:15:37PM +0100, Alan Cox wrote: On Thu, 23 Aug 2012 18:14:48 -0700 Joe Millenbach wrote: On Tue, Aug 21, 2012 at 6:20 AM, Alan Cox wrote:. config MOUSEPS2 tristate 'PS/2 mouse' + depends on TTY It shouldn't. It would be good to understand why this occurs. If I enable this config option, and turn off TTY I get the below errors. drivers/built-in.o: In function `serportldiscread': serport.c:(.text+0x1aace6): undefined reference to `ttyname' serport.c:(.text+0x1aad57): undefined reference to `ttyname' drivers/built-in.o: In function `serportinit': serport.c:(.init.text+0x8478): undefined reference to `ttyregisterldisc' drivers/built-in.o: In function `serportexit': serport.c:(.exit.text+0xb29): undefined reference to `ttyunregisterldisc' All because MOUSEPS2 depends on SERIO, just like a lot of entries I blocked. I assume this means I should keep the dependency on TTY. Unfortunately, I don't have time to dig deeper for the true cause of the dependency right now.

The true cause I think is that serio/serport.c should depend on tty to be built but the ps/2 mouse bits shouldn't. On the other hand, most people disabling CONFIGTTY will be building an extreme embedded system, and on such a system a PS/2 mouse seems highly unlikely.

Given that, perhaps the goal of removing dependencies on TTY could happen incrementally once CONFIGTTY exists? - Josh Triplett - To unsubscribe from this list: send the line 'unsubscribe linux-kernel' in the body of a message to majordomo@vger.kernel.org More majordomo info at Please read the FAQ at http://www.tux.org/lkml/. 24, 2012, 5:12 p.m. UTC The true cause I think is that serio/serport.c should depend on tty to be built but the ps/2 mouse bits shouldn't. On the other hand, most people disabling CONFIGTTY will be building an extreme embedded system, and on such a system a PS/2 mouse seems highly unlikely. Given that, perhaps the goal of removing dependencies on TTY could happen incrementally once CONFIGTTY exists? Fine by me - To unsubscribe from this list: send the line 'unsubscribe linux-kernel' in the body of a message to majordomo@vger.kernel.org More majordomo info at Please read the FAQ at Patch.